description flexstrip light is high brightness smd led mounted on fpc. six colors (red, orange red, yellow, green, blue and white) are available for variable applications. bright view provides functions of brightness dimmable and color changeable control system. features number of built-in smd leds : 330 pcs of ultra bright smd led product size (lxwxh) : 8250mm x 10mm x 2.6mm(with adhesive-tape back) smallest unit (125mm) of 5 leds can be cut at mark place continuous length flexible led light strips , total 66 units per reel low power consumption, high intensity runs on dc 24 volt power supply lead (pb) free, and rohs compliant applications amusement park & theater mood lighting architectural decorative lighting backlighting for signage letters auditorium walkway lighting stairway accent lighting hallway lighting bright view electronics flexstrip light BVM-SF5C01 series date 2008/09/22 page 1 of 5 version-a
product dimensions unit : mm part numbering system b v m - s f 5 c 0 1 w3s- a led color code product code led module bright view electronics BVM-SF5C01 series flexstrip light 3 3 10 5.2 125 125 solder pad 3m tape 0.7 2.6 12.5 25 25 25 25 5.2 5.2 solder pad solder pad 8250 date 2008/09/22 page 2 of 5 version-a
absolute maximum ratings at ta = 25 unit v dc v dc w operating temperature range storage temperature range *the operating temperature measured position is on the back of the pcb. typical electrical / optical characteristics at 24vdc ta = 25 BVM-SF5C01b3s blue BVM-SF5C01g3s green BVM-SF5C01r3s red BVM-SF5C01o3s orange BVM-SF5C01y3s yellow BVM-SF5C01w3s-a white BVM-SF5C01w3s-b white BVM-SF5C01w3s-c white BVM-SF5C01w3s-d white parameter max. electrostatic discharge (contact model) maximum operating voltage color power dissipation / reel 33 BVM-SF5C01 series 224 448 part no. 160 448 352 3.5 7.0 2.5 7.0 5.5 bright view electronics flexstrip light 1.32 1.32 current current 110 110 605 589 1.32 1.32 20 20 110 110 525 625 110 470 20 (degree) 25 per reel (a) per unit (lm) 2000 view angle per unit (ma) 30 to 65 30 to 85 16.5 1050 wavelength/cct d (nm)/ k lum.flux per reel (lm) lum.flux 20 20 1.32 20 1.32 110 2500-2800 20 1.32 16.5 1050 110 3500-3800 20 1.32 16.5 1050 110 3200-3500 16.5 1050 110 6300-7000 20 1.32 date 2008/09/22 page 3 of 5 version-a
packing bright view electronics flexstrip light BVM-SF5C01 series carton dimension(cm): 39 x 24 x 26 item no. device: q'ty pcs. n. w.: kgs. g. w.: kgs. electrostatic sensitive devices do not open or handle except at a static-free workstation carton : 20 reels r e y anti-electrostatic bag electrostatic sen sitive devices do n ot o pen o r handle except at a static-free workstation pb-free / rohs compliant grade: q'ty lot no.: part no.: bright view qa electronics co.,ltd. p art n o.: q'ty grade: lot no.: qa pcs 22 23 3 9 24 26 date 2008/09/22 page 4 of 5 version-a
cautions 1. solder connection should only be performed on designated solder pads(marked +/-). during soldering, do not execeed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 . 2. correct electrical polarity needs to be observed. wrong polarity may destroy the led module. 3. when using power supply the following basic safety features are required, in additional to any other specific application concerns and local safety codes: q overload protection q short circuit protection q over heat protection q correct output voltage, including consideration for ripple and spikes 4. make ensure that the power supply is of adequate power to operate the total load. 5. when mounting on metallic surface, there needs to be a electrical isolation between module and the mounting surface. 6.customer's desired lengths of minimum 125mm and its multiple can be made by breaking at the cutting mark of the led strip. 7.this product is not waterproof and precaution should be taken to keep from exposure to moisture. 8.the fpc (no. bvm-sp5 series) can be operated at maximum length of 8 meter. 9.pay attention to standard esd precautions when installing the led module. BVM-SF5C01 series flexstrip light bright view electronics date 2008/09/22 page 5 of 5 version-a
|
